Irakli Jinjolava

Underlayment Sound Ratings — Tested Assemblies

FIIC — Field Impact Insulation Class in accordance with ASTM E 1007 and E 989. All acoustical testing was done by Riverbank Testing Laboratories; Intest, Inc.; or Twin City Testing Corporation or D.L. Adams Associates, L.T.D. For type of floor covering used, channel spacing and other information, contact Maxxon for test reports by number. For good acoustical performance, the selection of a ...

FLOOR CEILING ASSEMBLY - pac-intl.com

ASTM E 989-06 (2012), Classification for Determination of Impact Insulation Class (IIC) ASTM E 2235-04 (2012) Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods. Test Procedure. All testing was conducted in the VT test chambers at Intertek-ATI located in York, Pennsylvania. The microphones were calibrated before conducting the tests. The airborne ...

Acoustical Testing TESTING SERVICES Laboratory ...

ASTM E 492 - 09 I ASTM E 989 - 06 On 6 Inch Concrete Slab Floor - Suspended Ceiling Assembly Overlaid with; Engineered Wood Flooring on ECO Cork Foam Underlayment Report Number: NGC 7014130 Assignment Number: G-1048 Test Date: 6/9/2014 Report Approval Date: 7 /10/2014 Submitted by: 0rl--Andrew E. Heuer Senior Test Engineer Reviewed by: The results reported above apply to specific samples ...

SOUND TRANSMISSION LOSS TEST REPORT NO. TL15-124

The test was performed in accordance with ASTM E 90-09, Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and ASTM E2235-04 ε1, Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods. Copies of the test standard are available at www.astm.org . The test chamber source and receiving room volumes are ...

NOISE LAB REPORT Number ASTM-2018 ES 211-I107 43432 E

Rating according to ASTM E 989 - 06 Impact Insulation Class IIC c: 51 dB Improvement of Impact Insulation Class ΔIIC: 23 dB Evaluation based on laboratory measurement results obtained in one-third-octave bands by an engineering method No.of test report: SONI107 Name of test institute: eco-scan bvba Date: Signature: Volker Spessart 28-Nov-18 L n, ref, c f L n,ref,c (*) 1/3 octave bands : 28 ...

SGM - Southern Grouts and Mortars - Installation Systems ...

Test: ASTM E 492 -04 / ASTM E 989 - 06 Test Number: NGC70081B4 Size: 17.8 Source room Temperature [cc]: 17.0 Humidity [0/01: 38 0.231 0.135 0.173 0.121 0.121 0.070 0.071 0.055 0.048 0.038 0.043 0.046 0.034 0.034 0.042 0.036 Date: 12/4/2008 Receiving room Volume V = m' Temperature 18.7 Humidity [0/01: 61 Corr. -4.4 -4.6 .42 u.Dev. Impact Insulation Class IIC= 65 dB Sum of unfavorable deviations ...

Appendix – International Standards

S-4-22 ASTM E 1698: 1995-00-00 Standard Practice for Testing Electrolytic Conductivity Detectors (ELCD) Used in Gas Chromatography / Note: Reapproved 2000 S-4-23 ISO 2718: 1974-04-00 Standard layout for a method of chemical analysis by gas chromatography S-4-24 JIS K 0114: 2000-07-20 General rules for gas chromatographic analysis S-4-25 JIS K 0115: 1992-02-01 General rules for molecular ...

TYPICAL PHYSICAL PROPERTIES SHEET - floorMuffler

Impact Isolation Class ( IIC ) up to (74) dB per ASTM E 492 / ASTM E 989 Delta Impact Isolation Class ( ∆IIC ) up to (25) dB per ASTM E 2179 Sound Transmission Class ( STC ) up to (73) dB per ASTM E 90 Moisture Vapor Transmission Rate (.3) lbs / 1000 ft² / 24 hr. per ASTM E 96 Compressive Strength @ 25% ≥ 11 psi per ASTM D 3575 Flammability Class A per ASTM E 84 Warranty Period Limited ...

D6771.07-113-11-R0 ACOUSTICAL PERFORMANCE TEST REPORT ASTM ...

ASTM E 989-06 (2012), Classification for Determination of Impact Insulation Class (IIC) 04/15/18 03/06/15. 130 Derry Courtaa York, PA 17406aa. ASTM E 413-10, Classification for Rating Sound Insulation ASTM E 492-09, Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine . p. 717.764.7700 f. 717.764.4129 www ...

BT433 Academic View Tile - Microsoft

Smoke Density: € ASTM E 662 Less than 450 SERVICE € € Warranties: € Lifetime Limited Carpet Tile Warranty, Lifetime Limited Colorfastness to Light, 10 Year Colorfastness to Atmospheric Contaminants, 10 Year Stain Warranty, Lifetime Static 569 Cadet Quickship Available 853 Fallow 924 Platinum Quickship Available 958 Ecru Quickship Available 959 Slate Quickship Available 989 Charcoal ...

1512 S BATAVIA AVENUE An ALION Technical Center GENEVA, IL ...

The test reported in this document conformed explicitly with ASTM E492-09: "Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine." The single number rating of the specimen was calculated according to ASTM E989-18: "Standard Classificati on for Determination of Single-Number Metrics for Impact Noise." A ...

AcoustiCORK CRC950 Brochure - Rubber Flooring Inc.com

of Commerce, for Impact Isolation Class (IIC) in accordance with ASTM E 492-04 and ASTM E 989-89 and for Sound Transmission Class (STC) in accordance with ASTM E 90-04 and ASTM E413-04. The results of this testing are shown in the table below: Solid Concrete Slab Thickness (With No Sound Rated Ceiling Assembly) 8 STC 56 FIELD ACOUSTICAL TESTING AcoustiCORK!"CRC950 has been tested in Field ...

HIGH PRESSURE LAMINATE (HPL) STANDARD COLORS & PATTERNS

ASTM D 2794 Visible Damage, Inches-Pounds Per Force (lbf) Graffiti Resistance ASTM D 6578 Marks Removed (Out of 6) Interior Finish Classification ASTM E 84 High Pressure Laminate (HPL)* $ – $$$$ 22"-lbf 6 Class B Powder-Coated Metal $ 2"-lbf 4 Class A Plastic (HDPE) $$ <1" -lbf 3 In 48 states and Washington, D.C., ASTM E 84 is not the ...

INTERNATIONAL ISO STANDARD 898-2

instance in EN 10269, ASTM F2281 and in ASTM A320/A320M. This part of ISO 898 is applicable to nuts: a) made of carbon steel or alloy steel; b) with coarse thread M5 ≤ D ≤ M39, and fine pitch thread M8×1 ≤ D ≤ M39×3; c) with triangular ISO metric thread according to ISO 68-1;

INTERNATIONAL ISO STANDARD 898-1

example, in EN 10269, ASTM F2281 and in ASTM A320/A320M. Certain bolts and screws might not fulfil the tensile or torsional requirements of this part of ISO 898 because the geometry of their heads reduces the shear area in the head compared to the stress area in the thread. These include bolts and screws having a low or countersunk head (see 8.2). This part of ISO 898 is applicable to bolts ...

Impact sound insulation according ISO 10140-1 Annex TS - ΔLw

Evaluation according ASTM E 2179 / ASTM E 989 A-2019-117 Measurement according DIN EN ISO 10140 10 20 30 40 50 60 70 80 63 125 250 500 1000 2000 Hz 4000 dB ⎯→ Frequency, f, Hz ⎯→ Lref,c c,, Created Date: 6/7/2019 4:40:55 PM ...

Astm C 823 - ketpang.ternatekota.go.id

Astm C 823 timing set for 2000 nissan altima pdf elusya de. laboratory inspection information request. 503 6r 97 guide for the application of epoxy and latex. astm c823 c823m 12 2017 standard practice for. standards and guidelines for repairing concrete structures. astm c823 2007 madcad com. humminbird 1 gps owners manual elusya de. handbook for concrete and cement table of contents. 503 6r 97 ...

Home : FAA Fire Safety

The ASTM F 501 results show that the modacrylic and wool fab- The Federal Test rics are the best, with cotton being the worst. Method indicates that the polyester fabric is the best with moda- The values for warp and fill crylic, cotton and wool the worst. directions for wool are both shown because the differences were The more severe ignition source (12 too large to be averaged. seconds) of ...

Section 501 Steel Structures

ASTM A 6/A 6M ASTM A153/A 153M ASTM A 325 (A 325M) ASTM A 490 (A490M) ASTM A 919 ASTM F 568M Class 4.6 . Section 501—Steel Structures Page 2 501.1.03 Submittals A. Pre-Inspection Documentation Furnish documentation required by the latest ANSI/AASHTO/AWS D 1.5 under radiographic, ultrasonic, and magnetic particle testing and reporting to the State’s inspector before the quality assurance ...

POLYSLICK 501 / 502 - Pactumax

GENERAL PROPERTIES ASTM or UL Test POLYSLICK 501 / 502 Typical Values PHYSICAL Density, g/cm3 D792 0.934 Water Absorption, % D570 - MECHANICAL Tensile Strength at Yield, MPa (ksi) D638 21 (3.1) Tensile Strength at Break, MPa (ksi) D638 48 (7) Elongation at Break, % D638 350 Young’s Modulus, GPa (106 psi) @ 23°C (73°F) D638 0.69 (0.1) IZOD Impact Strength, kJ/m (ft-lb/in) notch D256(a) 1.6 ...

ASTM-2002 Phantom for Testing Compliance of Implants ...

501-QDASTM01AA-A JM 1 (2) ASTM-2002 Phantom for Testing Compliance of Implants within MRI Environments Introduction The ASTM phantom has been designed for evaluation of induced heating near a passive medical implant and its surroundings during Magnetic Resonance Imaging (MRI). Its shape is a strong simplification of the human torso and filled with liquid or gel material approximating human ...

CONOWELD NO. 501

Physical properties were determined on specimens prepared under laboratory conditions using applicable ASTM procedures. Actual field conditions may vary and yield different results; therefore, data are subject to reasonable deviation. ConoWeld No. 501 is a primer to be used in conjunction with the Sauereisen line of epoxy coatings, linings and flooring mate-rials. ConoWeld No. 501 is applied ...

21 Spec - 501 Concrete

501 Concrete 501.1 Description (1) This section describes proportioning, mixing, placing, and protecting concrete mixtures. 501.2 Materials 501.2.1 Portland Cement (1) Use cement conforming to ASTM specifications as follows: - Type I portland cement; ASTM C150. - Type II portland cement; ASTM C150. - Type III portland cement; ASTM C150, for high early strength. - Type IP portland-pozzolan ...

STEEL GRADE/NAME INDEX - ASTM International

astm a266/a266m-13 342, 345 astm a333/a333m-13 246, 249 astm a334/a334m-04a (2010) 246, 249 astm a485-14 628 astm a508/a508m-14 343, 346 astm a537/a537m-13 115, 125 astm a541/a541m-05 (2015) 342, 345 1a asme sa-508/sa-508m 342, 345 asme sa-541/sa-541m 342, 345 astm a508/a508m-14 343, 346 astm a541/a541m-05 (2015) 342, 345 1cr12 gb 1220-92 519, 522 gb 3280-92 438, 440 gb 4226-84 519 gb 4237-92 ...

Product Knowledge Guide Plastics - Charlotte Pipe

• ASTM F 891 Cellular Core PVC DWV Pipe • ASTM D 2665 PVC DWV Pipe & Fittings • NSF Standard 14 >> Dimensional Standard • Schedule 40 Iron Pipe Size (IPS) >> Cell Class • 12454 PVC Solid Wall Pipe & Fittings • 11432 PVC DWV Cellular Core Pipe >> Maximum Working Temperature • 140° F >> Maximum Working Pressure • 0 (zero) PSI • PVC DWV is NOT a pressure-rated piping system ...

Chemical Resistance Information Guide

in ASTM F1186, “Standard Classification System for Chemicals According to Functional Groups.” Locate your specific chemical in the alphabetical Chemical Index on pages 5-6, and note the corresponding Chemical Sub-Class Number. Then locate that Sub-Class Number in the Chemical Resistance Test Data tables on pages 7-14 according to the product you are interested in. Table of Contents ...

CONSTRUCTION SPECIFICATION FOR COMPACTING

Field density and field moisture determinations shall be made according to ASTM D 6938. 501.07.04.02 Method A . The Contractor is responsible for establishing QC procedures. Page 4 Rev. Date: 11/2010 OPSS 501: 501.07.04.03 Method B . 501.07.04.03.01 General . When Method B is specified in the Contract Documents, QC compaction testing shall be based on material placed and compacted in the Work ...

Moisture Testing of Concrete Slabs Moisture Vapor ...

Unlike the MVER test which looks at the top ½ to ¾” of the slab, the ASTM F 2170-11 standard recommends that RH measurements be taken at 40% of the slab depth. For example, on a 4” thick slab, the probes would need to be placed at a depth of approximately 1.5”. (Fig. 1.5 typical RH probes) RH Probes test benefits: RH instruments can be independently calibrated directly traceable to ...

TECHNICAL DATA OF HOT FORMED STRUCTURAL TUBING CONFORMING ...

MARKING: Each Pipe shall be stencilled as per ASTM A501 / Client Requirement "TIGER/MADE IN UAE ASTM A501 GRADE A/B SIZE-----/LENGTH-----" Shaped Tubes - Tolerances on Dimensions Charpy V-notch impact test applies to Grade B only and wall thickness greater than 0.312 in. (8 mm). Average value of 20 ft-lb (27 J) at 0 °F (-18 °C). Value Addition: We are limiting the out-of-roundness for CHS ...

Color Stain 501 System SYSTEM DATASHEET

Tensile Strength ASTM D882 ; 7,000 psi Tensile Elongation ASTM D882 . 10% Pencil Hardness ASTM D3363 : 2H - 3H Adhesion to Concrete ASTM D7234 (100% Concrete Failure) 400 psi Abrasion Resistance ASTM D4060 (CS-17 wheel, 1 kg load, 1,000 cycles) 39 mg lost Water Absorption ASTM D570 (Two coats at 24 hour immersion) 0.10 % maximum Flammability ASTM D635 (Bonded to Concrete) Self-Extinguishing ...

Global Marketing for Tube & Pipe www.TubeSolution

ASTM A501-89 ASME SA501 HOT-FORMED WELDED AND SEAMLESS CARBON STEEL STRUCTURAL TUBING This standard is issued under the fixed designation A 501; the number immediately following the designation indicates the year of original adoption or, in the case of revision, the year of last revision. A number in parentheses indicates the year of last reapproval. A superscript epsilon (2) indicates an ...

Fretting–corrosion at the modular tapers interface ...

components were orientated according to the ASTM F 1440 and fixed using a high edge retention metallographic resin to the cement indication markers given on the femoral stem. In each case, the head – neck interface was immersed in 100 mL of 0.9 g/L NaCl. The head force was actuated against

MR SAFE – MR CONDITIONAL

The ASTM developed the testing standards (ASTM F 2052 ASTM F 2213, ASTM F 2182) for the current MR safe and MR compatible, and are now revising the technical terms. The ASTM developed a new set of terms with associated icons. The “NEW” terms, MR safe, MR conditional and MR unsafe, are defi ned by the ASTM document as follows: MR SAFE – MR CONDITIONAL Who, what, why, when, how. MR Safe ...

SPECIFICATION P-501. PORTLAND CEMENT CONCRETE PAVEMENT

* ASTM C 33 Table 2 Size Number 501–2.2 CEMENT. Cement shall conform to the requirements of ASTM C 150 Type I, Type II, or Type III. NOTE TO SPECIFIER: The FAA allows the following: ASTM C 150 – Type I, II, III, or IV. ASTM C 595 – Type IP, IS, S, I. Type I, Type II, or Type III cement was used in the Standard Specifications other types may be specified in the Special Provisions. ASTM C ...

Table E-1. Industry Test Documentation

12-second vertical 25.853 (b) ABD0031/AITM 2.0002B(2) BACM 1555A BSS 7230 F2 DMS 1511 ASTM F 501 2.5-in/min horizontal 25.853 (b-2) ABD0031/AITM 2.0003 (2) BACM 1555A BSS 7230 F3 DMS 1505 ASTM F 776 4-in/min horizontal 25.853 (b-3) ABD0031/AITM 2.0003 (2) BACM 1555A BSS 7230 F4 DMS 1507 ASTM F 776 Oil burner seats 25.853 (c) ABD0031/AITM 2.0009 (2) BAEP 4508 BSS 7303 DMS 2274 HB 7263 * Fire ...

National Fire Protection Association

ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959. ... Second Revision No. 2-NFPA 501-2016 [ Section No. D.1.2.2 ] D.1.2.2ASTM PublicationPublications. ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959. ASTM E903, Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using ...

Araldite 501 A/B - Samaro

Araldite® 501 A/B Page 1 of 5 6/7/2009 Advanced Materials . Araldite 501 A/B . EPOXY LAMINATING SYSTEM - Good mechanical strength - High temperature resistance up to 248°F (120°C) DESCRIPTION : Araldite ® 501 A/B epoxy adhesive is a two-part system that cures at either ambient or elevated temperatures. It is designed for use in repair of composite aircraft components, maintaining its ...

I. DESCRIPTION II. MATERIALS

Section 37 – PORTLAND CEMENT CONCRETE PAVEMENT – P-501 37-2 PCC PAVEMENT P-501 3. Coarse Aggregate a) Conform to: (1) ASTM C33 (a) within separated size groups (1) Gradation – Contractor to select from Table 2 (b) Tested per ASTM C136 Table 2 GRADATION FOR COARSE AGGREGATE ASTM C 33 Sieve Designations (square openings)

TEST REPORT : E2552.04- 501 -47

Test Report No.: E2552 .04 -501 -47 Report Date: 07/12/16 Page 6 of 9 7.0 Test Results : The temperature during testing was 20.5°C ( 69 °F). The results are tabulated as follows: Test Specimen #1 : Title of Test Results Allowed Note Operating Force, per ASTM E 2068 Initiate motion: 45 N ( 10 lbf) 60 N ( 13 lbf) max. Maintain motion:

Swing Check Valve REL-FCV-L501F R0051B

Seat Bronze ASTM B62 Seat Stainless Steel AISI 304 Design and materials subject to change without noti ce. Reliable Automatic Sprinkler Co., Inc. Manufacturer & Global Distributor of Fire Protection Products www.reliablesprinkler.com Resilient Seated Flanged Swing Check Valve REL-FCV-L501F Bulletin No.: R0051B Description Size (mm) Part Number RASCO, FxF, 300PSI FCV, L501F (PN10/PN16) 50 (2 ...

ROOFING 501 Elasto-Brite

ASTM D 2370 Tensile Strength: 259 PSI, Nominal ASTM D2370 Tear Resistance: 82 lbs. force/in. ASTM D 624 Cure Time: 24 to 48 [email protected] 77°F and 50% Relative Application Temp.: 40 °F to 100°F Service Temp (Cured Film): -15°F to 180°F VOC Content: 42 g/L MAX ASTM D 6083 Type I

Second Revision No. 1-NFPA 501-2016 [ Section No. 14.3.13 ]

ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959. ... Second Revision No. 2-NFPA 501-2016 [ Section No. D.1.2.2 ] D.1.2.2ASTM PublicationPublications. ASTM International, 100 Barr Harbor Drive, P.O. Box C700, West Conshohocken, PA 19428-2959. ASTM E903, Standard Test Method for Solar Absorptance, Reflectance, and Transmittance of Materials Using ...

ASTM D2697 (2003; R 2014) Volume Nonvolatile Matter in ...

ASTM INTERNATIONAL (ASTM) ASTM D2240 (2005; R 2010) Standard Test Method for Rubber Property - Durometer Hardness ASTM D2621 (1987; R 2011) Infrared Identification of Vehicle Solids from Solvent-Reducible Paints ASTM D2697 (2003; R 2014) Volume Nonvolatile Matter in Clear or Pigmented Coatings ASTM D3335 (1985a; R 2014) Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic ...

Makrolon AR sheet - Aetna Plastics

AAMA 501.8: Resistance to Human Impact of Windows Systems Intended for Use in Psychiatric Applications *Typical properties are not intended for specification purposes Typical Properties* Property Test Method Units Values PHYSICAL Specific Gravity ASTM D 792 – 1.2 Refractive Index ASTM D 542 – 1.586 Light Transmission, Clear @ 0.118˝ ASTM D 1003 % 86 Light Transmission, I30 Gray @ 0.118 ...

OPSS 501.05 MATERIALS OPSS 501.05.01 Granular Material

Field density and field moisture determinations shall be made according to ASTM D 6938. 501.07.04.02 Method A The Contractor is responsible for establishing QC procedures. Page 5 Rev. Date: 11/2014 OPSS.MUNI 501 501.07.04.03 Method B 501.07.04.03.01 General When Method B is specified in the Contract Documents, QC compaction testing shall be based on material placed and compacted in the Work on ...

Elcometer 501 Pencil Hardness Tester

The Elcometer 501 Pencil Hardness Tester can be used in accordance with the following National and International Standards: ASTM D 3363, BS 3900-E19, EN 13523-4 supersedes ECCA T4, ISO 15184, JIS K 5600-5-4. Note: For ASTM D 3363, the test is started using the hardest pencil and continued down the scale of hardness to determine the two end ...

SUSPENDED CEILINGS Suspension Systems for Acoustical Lay ...

• For further information on bracing of non-load bearing partitions refer to NWCB Technical Document #200-501. • All main beams are to be Heavy Duty (HD). Source: ASTM E580 Section 5.1.1 • Ceilings less than or equal to 144 ft2 and surrounded by walls connected to the structure above are exempt from the seismic design requirements. Source ASTM E580 Section 1.4 • These recommendations ...

UNDERWATER SOIL SAMPLING, - ASTM International

ASTM SPECIAL TECHNICAL PUBLICATION 501 E. D'Appolonia, symposium chairman List price $15.50 04-501000-38 AMERICAN SOCIETY FOR TESTING AND MATERIALS 1916 Race Street, Philadelphia, Pa. 19103 9 BY AMEPaC~N SOCmTY FOrt TESTING AND MATE~LS 1972 Library of Congress Catalog Card Number: 77-185536 NOTE The Society is not responsible, as a body, for the statements and opinions advanced in this ...