Specific Gravity Astm Standard

Material Specification Turcon T10

Material Specification Turcon T10

Turcon® T10 Material A high grade composition of virgin PTFE compounded with carbon and graphite. Colour Black. The colour of the material may have variations in shading. Property Test Conditions Standard Unit Value Specific Gravity 23°C ASTM D 792 g/cm³ 2.10 max. 2.05 min. Tensile Stress @ Break 23°C ASTM D 4894 MPa 15 min. Tensile Elongation @ Break 23°C ASTM D 4894 % 150 min. Ball ...

[Read More] [Donwload pdf] [Read Online]
Dyneon PTFE - 3M

Dyneon PTFE - 3M

• Meets ASTM D4895 Type , Grade 9, Class B, (previously ASTM D1457, Type , Grade 2, Class B) as referenced in specification GM 6130M ... D-65444 Kelsterbach, Germany Phone: +49 (6107) 772 516 Fax: +49 (6107) 772 517 www.dyneon.com Dyneon™ TFM™ 2001 PTFE Properties and Fuel Performance Automotive TFM™ 2001 PTFE Specification Range Norminal Value Standard Specific Gravity 2.14-2.16 2.14 ...

[Read More] [Donwload pdf] [Read Online]
COMPOSITE MATERIALS AND ENGINEERING CENTER, WASHINGTON ...

COMPOSITE MATERIALS AND ENGINEERING CENTER, WASHINGTON ...

ASTM D198 Standard test methods of static tests of lumber in structural sizes (except sections 3744)- ASTM D1037 Standard test methods for evaluating properties of wood-base fiber and particle panel materials ASTM D1761 Standard test method for mechanical fasteners in wood ASTM D2395 Standard test methods for specific gravity of wood and wood-based materials ASTM D2915 Standard practice for ...

[Read More] [Donwload pdf] [Read Online]
Teflon PTFE 8A X

Teflon PTFE 8A X

Note: Teflon™ PTFE 8A X meets the requirements of ASTM D4894-15, Type IV, Grade 1. Typical properties are not suitable for specification purposes. 1Measured on skived tapes with a thickness of 0.13 mm. Property Test Method Unit Typical Value Particle Size, Average Diameter ISO 13320 ASTM D4894 µm 490 Standard Specific Gravity ISO 12086 ASTM D4894 2.15 Bulk Density ISO 12086 ASTM D4894 g/L ...

[Read More] [Donwload pdf] [Read Online]
Subject Index - ASTM International

Subject Index - ASTM International

ASTM Standard D 3701-83: 64 . SUBJECT INDEX 135 Paint and related materials, ASTM Standard D 3980-83: 76 Peeling resistance, cold-applied glue, 111-113 Perfotest Baronnie, 38, 51 Pigments, specific gravity of, ASTM Standard D 153-84: 54 Plastic cap, metal fasteners, 18-20 Polyester, in modified bitumen membranes, 53- 62, 92-99, 95(table), 102-109 Polypropylene, atactic, in modified bituminous ...

[Read More] [Donwload pdf] [Read Online]
Michigan Technological University Digital Commons ...

Michigan Technological University Digital Commons ...

(Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate). Testing revealed that ASTM C127-07 does not accurately represent the particle density of the material due to the large surface pores where, mainly in the blast slag samples. 1 . 1. Introduction . Density is a basic property of a material and is defined as mass divided by volume. While ...

[Read More] [Donwload pdf] [Read Online]
DAFTAR PUSTAKA - repository.usu.ac.id

DAFTAR PUSTAKA - repository.usu.ac.id

Sifat-sifat Fisis dan Geoteknis, Edisi Kedua, Erlangga, Jakarta. ASTM D-2216. 1992. Standard Test Method for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass. ASTM D-854. 1992. Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer. ASTM D-4318. 1995. Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils. ASTM C ...

[Read More] [Donwload pdf] [Read Online]
Teflon PTFE 7A X

Teflon PTFE 7A X

Note: Teflon™ PTFE 7A X meets the requirements of ASTM D4894-15, Type II. Typical properties are not suitable for specification purposes. 1Measured on skived tapes with a thickness of 0.13 mm. Property Test Method Unit Typical Value Particle Size, Average Diameter ISO 13320 ASTM D4894 µm 38 Standard Specific Gravity ISO 12086 ASTM D4894 2.16 Bulk Density ISO 12086 ASTM D4894 g/L 460 Tensile ...

[Read More] [Donwload pdf] [Read Online]
FABRICATION GUIDELINES - Cerami, Inc.

FABRICATION GUIDELINES - Cerami, Inc.

FABRICATION GUIDELINES REVISED JUNE 2015 Technical Specifications and Certifications Property. Test Standard IceStone Results: Compressive Strength ASTM C – 109 13,000 psi - 16,000 psi Flexural Strength ASTM C – 203 890 psi Specific Gravity ASTM C – 97 2.31 g/cm3 Porosity/Absorption ASTM C – 642 0.18% unsealed Chemical Durability ASTM C – 1260 for ASR reactibility: 0.49% 300 cycles ...

[Read More] [Donwload pdf] [Read Online]
ASTM Volume 15.01, March 2018 Refractories, Activated ...

ASTM Volume 15.01, March 2018 Refractories, Activated ...

ASTM Volume 15.01, March 2018 Refractories, Activated Carbon; Advanced Ceramics C16-03(2012)e2 Standard Test Method for Load Testing Refractory Shapes at High Temperatures C20-00(2015) Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water C24-09(2013) Standard Test Method for Pyrometric ...

[Read More] [Donwload pdf] [Read Online]
Accreditation Unit - AU

Accreditation Unit - AU

Marshall stability & flow of Asphalt Mixtures American Standard ASTM D6927-15 Quantitative Extraction of Asphalt Binder from Asphalt Mixtures by the centrifuge extraction method American Standard ASTM D2172/D2172M-17 (Method A)+Ashing method Theoretical maximum specific gravity & density of Bituminous Paving Mixtures American Standard ASTM D2041/D2041M-11 Bulk Specific Gravity & Densit

[Read More] [Donwload pdf] [Read Online]
NTA, INC.

NTA, INC.

ASTM D4442 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Based Materials . ASTM D4869/D4869M Standard specification for asphalt-saturated organic felt underlayment used in steep slope roofing . ASTM D6111 Standard test method for bulk density and specific gravity of plastic lumber and shapes by displacement . ASTM D6341 Standard test method for determination of ...

[Read More] [Donwload pdf] [Read Online]
ASTM Volume 05.06, September 2018 Gaseous Fuels; Coal and ...

ASTM Volume 05.06, September 2018 Gaseous Fuels; Coal and ...

ASTM Volume 05.06, September 2018 Gaseous Fuels; Coal and Coke; Catalysts; Bioenergy and Industrial Chemicals from Biomass C515-13(2018) Standard Specification for Chemical-Resistant Ceramic Tower Packings D121-15 Standard Terminology of Coal and Coke D167-12a Standard Test Method for Apparent and True Specific Gravity and Porosity of Lump Coke D197-87(2012) Standard Test Method for Sampling ...

[Read More] [Donwload pdf] [Read Online]
Astm D 698 - braswell.pixabox.me

Astm D 698 - braswell.pixabox.me

ASTM D-698 No. 4 Method C Water Content % Specific Gravity 30.90 23.6 7.3 LL % PL % PI % Coarse Grained Clayey Sand (SC) Old Union #2 Mine, Basin 138, Dam Material Optimum Moisture Content= Maximum Dry Density = Sample Description, Classification and Location Sample No.: Basin 138 Dam Material 20.50 30.9 108.0 109.0 110.0 111.0 112.0 STANDARD PROCTOR COMPACTION TEST (ASTM D-698) ASTM D8167 ...

[Read More] [Donwload pdf] [Read Online]
Astm D 698 - amarante.besthdwallpapers.me

Astm D 698 - amarante.besthdwallpapers.me

ASTM D-698 No. 4 Method C Water Content % Specific Gravity 30.90 23.6 7.3 LL % PL % PI % Coarse Grained Clayey Sand (SC) Old Union #2 Mine, Basin 138, Dam Material Optimum Moisture Content= Maximum Dry Density = Sample Description, Classification and Location Sample No.: Basin 138 Dam Material 20.50 30.9 108.0 109.0 110.0 111.0 112.0 STANDARD PROCTOR COMPACTION TEST (ASTM D-698) ASTM D8167 ...

[Read More] [Donwload pdf] [Read Online]
TEST STANDARDS - img1.exportersindia.com

TEST STANDARDS - img1.exportersindia.com

TEST STANDARDS (Table No: B-14-01) Sl. Physical PropertiesTest Unit Specification No. Standard 01 Hardness ISO 7619 Shore A 85 +/- 3 02 Specific Gravity g/cm3 (1.3 +/- 0.1)* 03 Tear Strength ASTM D 624 Kgs/cm 22 min 04 Applicable Temp. Range -30 deg to 80 deg 05 Other Properties Excellent resistance to water, mild acid and alkalis 06 Tensile Strength ISO 37 Kgs/cm2 52 minium 07 Thermal w/m0C 0 ...

[Read More] [Donwload pdf] [Read Online]
STANDARD OPERATING PROCEDURE NO. 75 SPECIFIC GRAVITY TEST

STANDARD OPERATING PROCEDURE NO. 75 SPECIFIC GRAVITY TEST

The procedures set forth in this SOP are also intended for use with the ASTM standard designations D854-02 and C127-04 (Appendices 2 and 3, respectively). 5.0 EQUIPMENT LIST a) For material passing the No. 4 (4.75 mm) sieve: -Pycnometer: a volumetric flask with a minimum capacity of 500 ml

[Read More] [Donwload pdf] [Read Online]
METHOD OF TEST FOR DETERMINATION OF SPECIFIC GRAVITY OF SOILS

METHOD OF TEST FOR DETERMINATION OF SPECIFIC GRAVITY OF SOILS

2.3 ASTM D854-98 Standard Test Method for Specific Gravity of Soils ASTM D2435 Standard Test Method for One-Dimensional Consolidation Properties of Soils Using Incremental Loading ASTM D4753 Standard Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing 3. DEFINITION The specific gravity of a soil is the ratio of ...

[Read More] [Donwload pdf] [Read Online]
Lexan* Resin 940A Americas: COMMERCIAL

Lexan* Resin 940A Americas: COMMERCIAL

Lexan* Resin 940A Americas: COMMERCIAL TYPICAL PROPERTIES¹ TYPICAL VALUE Unit Standard PHYSICAL Specific Gravity 1.21-ASTM D 792 Specific Volume 0.83 cm³/g ASTM D 792 Density 1.217 g/cm³ ASTM D 792 Water Absorption, 24 hours 0.15 % ASTM D 570 Water Absorption, equilibrium, 23C 0.35 % ASTM D 570 Water Absorption, equilibrium, 100°C 0.58 % ASTM D 570

[Read More] [Donwload pdf] [Read Online]
TESTING EQUIPMENT FOR CONSTRUCTION MATERIALS

TESTING EQUIPMENT FOR CONSTRUCTION MATERIALS

ASTM C29; ASTM C138 Bulk Density Measures Bulk Density Measures are manufactured from heavy gauge steel complying with the related standard,coated against corrosion. Standards Product Code EN 1097-6 ; EN 12390-7 JB-050/1 Specific Gravity Frame. JB-050/2 Craddle. JB-050/3 Water Tank. Specific Gravity Frame

[Read More] [Donwload pdf] [Read Online]
TLT-212 (02) MIXING AND COMPACTION TEMPERATURE OF ASPHALT ...

TLT-212 (02) MIXING AND COMPACTION TEMPERATURE OF ASPHALT ...

2.4 ASTM D4311 Standard Test Method for Determining Asphalt Volume Correction to a Base Temperature 3.0 PROCEDURE 3.1 Determine kinematic viscosity in mm2/s at 135ºC (ASTM D2170). 3.2 Determine absolute viscosity in Pa.s at 60ºC (ASTM D2171). 3.3 Determine specific gravity at 15.6ºC (ASTM D70). 3.4 Convert the absolute viscosity at 60ºC (in Pa.s) to viscosity at 60°C (in mm2/s) by using ...

[Read More] [Donwload pdf] [Read Online]
Practice and testing of stone cladding in Hong Kong

Practice and testing of stone cladding in Hong Kong

ASTM test standard ASTM standard Subject C 97 Absorption and Bulk Specific Gravity of Dimension Stone C 99 Modulus of Rupture of Dimension Stone C 170 Compressive strength of Dimension Stone C 295 Guide to Petrographic Examination of Aggregates for Concrete C 880 Flexural Strength of Dimension Stone C 1201 Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static ...

[Read More] [Donwload pdf] [Read Online]
EXPERIMENT 4 SPECIFIC GRAVITY DETERMINATION

EXPERIMENT 4 SPECIFIC GRAVITY DETERMINATION

SPECIFIC GRAVITY DETERMINATION Purpose: This lab is performed to determine the specific gravity of soil by using a pycnometer. Specific gravity is the ratio of the mass of unit volume of soil at a stated temperature to the mass of the same volume of gas-free distilled water at a stated temperature. Standard Reference: ASTM D 854-00 – Standard Test for Specific Gravity of Soil Solids by Water ...

[Read More] [Donwload pdf] [Read Online]
Technical Information - MoistureShield

Technical Information - MoistureShield

ASTM D1037 650.7 lbf 2.89 kN Through thinnest part of standard 5/4 x 6 profile. Equivalent Specific Gravity NDS 0.50 - - - - - National Design Specification. Heat Deflection Temperature @ 264 psi: ASTM D648 157oF 69oC Vicat Softening Point: ASTM D1525 242oF 116oC Compressive Strength: ASTM D1621 962 lbs/in2 6,632.8 kPa or 6,632.8 kN/m2 5/4 x 6 engineered deck board, flatwise, perpendicular to ...

[Read More] [Donwload pdf] [Read Online]
AVILES ENGINEERING CORPORATION GEOTECHNICAL ASTM D421 ASTM ...

AVILES ENGINEERING CORPORATION GEOTECHNICAL ASTM D421 ASTM ...

ASTM D421 (Withdrawn 2007)1 Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants ASTM D422 (Withdrawn 2007)1 Particle-Size Analysis of Soils ASTM D558 Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures ASTM D698 Laboratory Compaction Characteristics of Soil Using Standard Effort ASTM D854 Specific Gravity of Soil Solids by Water ...

[Read More] [Donwload pdf] [Read Online]
STANDARD SPECIFICATION QATAR MARINE CRUDE OIL

STANDARD SPECIFICATION QATAR MARINE CRUDE OIL

Density @ 150 C ASTM D5002 kg/L 0.8702 Specific Gravity @ 60/600 F Conversion - 0.8707 Total Sulphur ASTM D4294 % Wt. 2.17 Mercaptan Sulphur UOP 163 ppm wt. 230 Hydrogen Sulphide UOP 163 ppm wt. 320 Total Acid Number ASTM D664 mgKOH/g 0.15 Pour Point ASTM D 5853 °F -5.8 Reid Vapour Pressure ASTM D5191 psi 4.65 Kinematic Viscosity @ 150 C ASTM D445 cSt 23.41 Salt Content ASTM D3230 PTB 76.0 ...

[Read More] [Donwload pdf] [Read Online]
13.0 REFERENCES - DNR

13.0 REFERENCES - DNR

ASTM, 1995. Standard Guide for Developing Conceptual Site Models for Contaminated Sites: E 1689­95. ASTM, 1995. Standard Guide for Risk­Based Corrective Action Applied at Petroleum Release Sites: E1739­95. ASTM, Standard Test Method for Density of Soil in Place by the Drive­Cylinder Method: D2937. ASTM, Standard Test Method for Specific Gravity of Soil Solids by Water Pycnometer: ...

[Read More] [Donwload pdf] [Read Online]
5.9.69 Relative Density (Kansas Test Method KT-69)

5.9.69 Relative Density (Kansas Test Method KT-69)

KT-69 reflects testing procedures found in ASTM D 4253. 2. REFERENCED DOCUMENTS 2.1. KT-6 Specific Gravity and Absorption of Aggregate 2.2. KT-2 Sieve Analysis of Aggregates 2.3. KT-3 Material Passing 75 µm (No. 200) Sieve by the Wash Method 2.4. KT-11 Moisture Test 2.5. ASTM D 653 Standard Terminology Relating to Soil, Rock and Contained Fluids 2.6. ASTM D 698 Standard Test Methods for ...

[Read More] [Donwload pdf] [Read Online]
issued by United Kingdom Accreditation Service

issued by United Kingdom Accreditation Service

ASTM D5731-16 Preparing Rock Core as cylindrical test specimens and verifying conformance to dimensional and shape tolerances ASTM D4543-19 Compressive Strength and Elastic Moduli of Intact Core Specimens ASTM D7012-14e1 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer ASTM D854-14 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils ...

[Read More] [Donwload pdf] [Read Online]
Evaluation and Assessment of Concrete Produced by ...

Evaluation and Assessment of Concrete Produced by ...

water absorption and density, will be carried out as per ASTM C642 (1990) i.e., Standard test method for specific gravity, absorption, and voids in hardened concrete, whereas rapid chloride permeability testing were carried out as per ASTM C1202-09 Standard test method for electrical indication of concrete’s ability to resist chloride ion penetration. (Table 1) Type of Test Number of ...

[Read More] [Donwload pdf] [Read Online]