The Medlite Home Care Bed Medline Com-PDF Free Download

THE MEDLITE HOME CARE BED medline com

2020 | 12 views | 28 Pages | 5.59 MB

Medline at 1-800- Medline before use - otherwise serious bodily injury or product damage may occur. Read ALL general guidelines, warnings and cautions before performing any repair / maintenance on the bed. All repair and maintenance on the bed should be performed by a qualified technician.



Congratulations on your selection of the Medline Home Care Bed Medline s
Home Care Bed is the right choice for value and performance It is specially
designed for easy assembly and operation and is manufactured to precise
quality standards with the finest materials
We sincerely hope it will provide the very best in functionality comfort rest
and convenience
Thank you for choosing the Home Care Bed
Typical Product Specifications for the Medline Home
Full Electric Semi Electric Full Electric
3 motor 2 Motor 1 Crank Low Bed
Model Number MDR107003L MDR107002L MDR107003LO
Casters on Outer leg
Min 27 5 69 85 cm
Head Foot Min 26 66 04 cm Min 26 66 04 cm Max 40 1 101 85 cm
Board Height Max 33 85 85 98 cm Max 33 85 85 98 cm Casters on Inner leg
Min 25 1 63 75 cm
Max 37 8 96 01 cm
80 203 2 cm Length 89 226 06 cm Length 89 226 06 cm Length 89 226 06 cm
Spring Overall Bed Width 35 75 90 8 cm Width 35 75 90 8 cm Width 35 75 90 8 cm
Spring Deck Width 34 5 87 63 cm 34 5 87 63 cm 34 5 87 63 cm
Casters on Outer leg
Min 12 7 32 26 cm
Min 15 38 1 cm Min 15 38 1 cm Max 25 3 64 26 cm
Spring Deck Height
Max 23 58 42 cm Max 23 58 42 cm Casters on Outer leg
Min 10 3 26 16 cm
Max 23 58 42 cm
Shipping Weight 180 7 lbs 81 96 kg 172 2 lbs 78 11 kg 185 4 lbs 84 09 kg
Weight Capacity 450 lbs 204 12 kg 450 lbs 204 12 kg 450 lbs 204 12 kg
Head Section Adjust Approximately 70 Approximately 70 Approximately 70
Knee Section Adjust Approximately 35 Approximately 35 Approximately 35
Motor DC Input DC Input DC Input
2 MDR107002L MDR107003L MDR107003LO PIC 00299 Revision 05 14 19
TO ENSURE YOUR SAFETY IN USING THIS MEDLINE HOME CARE BED ALL WARNINGS
AND SAFETY INFORMATION AND ALL INSTRUCTIONS MUST BE FOLLOWED FAILURE
TO DO SO MAY RESULT IN SERIOUS BODILY INJURY OR DAMAGE TO THE BED
DO NOT USE THIS PRODUCT WITHOUT FIRST READING AND UNDERSTANDING THE
INSTRUCTIONS CONTAINED IN THIS BOOKLET IF YOU ARE UNABLE TO UNDERSTAND
THE WARNINGS CAUTIONS OR INSTRUCTIONS CONTACT A HEALTHCARE
PROFESSIONAL DURABLE MEDICAL DEALER OR TECHNICAL PERSONNEL OR
CONTACT MEDLINE AT 1 800 MEDLINE BEFORE USE OTHERWISE SERIOUS BODILY
INJURY OR PRODUCT DAMAGE MAY OCCUR
A QUALIFIED TECHNICIAN MUST PERFORM ANY REPAIR OR CHANGE TO THIS BED OR
SERIOUS INJURY MAY OCCUR TECHNICIANS DO NOT SERVICE THE BED WITHOUT
FIRST READING AND UNDERSTANDING THIS OWNER S MANUAL IF YOU ARE
UNABLE TO UNDERSTAND THE WARNINGS CAUTIONS OR INSTRUCTIONS OR HAVE
ANY QUESTIONS CONTACT MEDLINE AT 1 800 MEDLINE
DO NOT USE ACCESSORIES PARTS OR ADAPTERS OTHER THAN THOSE AUTHORIZED
BY MEDLINE
WARNINGS CAUTION NOTICES USED IN THIS MANUAL APPLY TO HAZARDS
OR UNSAFE PRACTICES WHICH COULD RESULT IN PERSONAL INJURY AND OR
PROPERTY DAMAGE
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
1 800 MEDLINE 633 5463 medline com 3
Table of Contents
Product Specifications 2
General Warnings 3
Table of Contents 4
Basic Home Care Bed Terminology
Full Electric Bed Schematic 5
Bed Schematic Legend Parts List 6
Warnings and Safety Instructions
General Cautions 7
Electrical Cautions 9
Weight Limitations 10
Unpacking the Bed 11
Bed Assembly
Seven Easy Steps 12
Connecting the Two Frames 13
Connecting the Spring Fabric 14
Installing the Casters 15
Installing the Headboard and Footboard 16
Patient Hand Control 17
Adjusting Connecting the Head Spring Pull Tube 18
Installing the Center Drive Shaft 20
Junction Box Connections 22
Leveling the Bed 24
Bed Operation
Hand Control Semi electric Full Electric Beds 23
Bed Maintenance
Cleaning the Bed 25
Inspecting the Bed 26
Troubleshooting Guide 27
Motor Adjustment 27
Limited Warranty 28
4 MDR107002L MDR107003L MDR107003LO PIC 00299 Revision 05 14 19
Medlite Home Care Bed Parts Diagram
Full Electric Bed See Page 6 for List of Terms
22 Foot Spring
Head Spring 10
1 800 MEDLINE 633 5463 medline com 5
Medlite Homecare Bed Parts List
Medline Home Care Bed
Part Number Description Bed Style Item Number Quantity
1 Foot Spring Assembly All MDR630054 1 EA
2 Head Spring Assembly All MDR630114 1 EA
Foot Board Assembly S MDR630014 1 EA
Foot Board Assembly F MDR630314 1 EA
4 Headboard Assembly All MDR630024 1 EA
5 Casters 2 locking 2 non locking All MDR620034 4 Bx
6 Drive Shaft Two Pieces All MDR620124 1 EA
Emergency Crank Handle
7 All MDR620104 1 EA
Optional Accessory
Pendant With Cord Two Motor S MDR630094R 1 EA
Pendant With Cord Three Motor F MDR630154R 1 EA
Junction Box 2 motor S MDR630084R 1 EA
Junction Box 3 motor F MDR630144R 1 EA
10 Motor Actuator for Foot Spring S F MDR630074R 1 EA
11 Motor Actuator for Head Spring S F MDR630064R 1 EA
12 Hi Low Motor Assembly F MDR630164R 1 EA
13 Gear Box for Head Board All MDR620025 1 EA
Gear Box For Footboard With Handle S MDR620015 1 EA
Gear Box For Footboard No Handle F MDR630035 1 EA
15 Handle Assembly For Hi Low S MDR620085 1 EA
16 Fasteners Set for Head Spring Motor All MDR620005 1 Set
17 Extension Tube of Head Motor Assembly S F MDR630065 1 EA
18 Fasteners Set for Foot Spring Motor All MDR620055 1 Set
19 Gear Box Screw All MDR620155 4 Set
20 Panel for Headboard Footboard All MDR630244 1 PR
21 Composite Inserts for Casters All MDR620185 4 Set
22 Emergency Battery Box All MDRBATTERYBOX 1 EA
Bed Style F Full Electric Bed MDR107003L
S Semi Electric Bed MDR107002L
6 MDR107002L MDR107003L MDR107003LO PIC 00299 Revision 05 14 19
Warnings Safety Instructions
General Cautions
DO NOT use this product without first reading and understanding the instructions contained in
this booklet If you are unable to understand the Warnings Cautions or Instructions contact a
healthcare professional durable medical equipment dealer or technical personnel or contact
Medline at 1 800 Medline before use otherwise serious bodily injury or product damage
Read ALL general guidelines warnings and cautions before performing any repair
maintenance on the bed All repair and maintenance on the bed should be performed by a
qualified technician After any adjustments repair or service and BEFORE use make sure all
attaching hardware is tightened securely
Inspect all parts for shipping damage before assembly and use In case of damage DO NOT
use Contact your shipping carrier immediately for instructions For any nonshipping issues
contact your Medline Dealer for further instructions
DO NOT use near explosive gases Possible fire hazard when used with oxygen administering
equipment other than nasal or masked type
Use ONLY mask or nasal type oxygen administering equipment around the bed The use of any
other type of oxygen administering equipment can result in a fire hazard
When using nasal or masked type administering equipment oxygen or air tubing must be
routed and secured properly to ensure that tubing does not become entangled and eventually
severed during normal operation of the bed
When using liquids in or around the bed caution should be taken to ensure that liquids of
any kind are not spilled If a liquid is spilled in or around the electric bed unplug the bed
immediately before cleaning Clean up the spill and let the bed or area around it dry thoroughly
before using the electric controls again
Close supervision is necessary when this product is used by or near children or physically
challenged individuals
NEVER PERMIT ANYONE TO BE UNDER THE BED OR IN BETWEEN THE RAISED BED FRAME
COMPONENTS AT ANY TIME
Never permit more than one person on in the bed at any time
1 800 MEDLINE 633 5463 medline com 7
Warnings Safety Instructions
General Cautions
Keep the bed a minimum of 12 inches 30 48 cm away from any direct heat source
When the bed is not going to be used for an extended period UNPLUG electric bed from the
wall outlet
DO NOT unplug the power cord from the junction box
The bed is not designed to be used as a patient transport When transporting a patient use an
approved patient transport otherwise injury or damage may result
When operating or moving the bed always ensure that the individual in the bed is properly
positioned within the bed DO NOT allow extremities to extend beyond the sides or between
the bed rails when performing these functions
After assembly test to make sure that all sections are properly and securely in place and
Ensure that the head and foot spring sections are securely locked to each other and to the head
and foot boards BEFORE use
Ensure that the pendant and power cords are routed and secured properly so the cords do
not become entangled pinched and or severed during operation of the electric bed NEVER
operate the bed if these cords are damaged
Keep all moving parts and all drive shafts free of obstructions during operation of the bed i e
blankets sheets heating blankets pads tubing wiring etc and other types of products using
electric cords which may get tangled around the bed legs or optional side rails
Ensure the bed caster locks are properly engaged to prevent casters from moving whenever
the bed is stationary ALWAYS lock the caster locks when transferring into or out of the bed
Inspect the caster locks BEFORE using the bed to ensure the locks function adequately Even
with casters properly locked some floor surfaces will allow the bed to move under some
conditions Use of the bed on such floor surfaces must be evaluated by the care provider
If any part of the bed is not working properly call a qualified technician to examine and
8 MDR107002L MDR107003L MDR107003LO PIC 00299 Revision 05 14 19
Warnings Safety Instructions
General Cautions
Improper use of some bed accessories patient restraints side rails trapeze devices etc
can cause patient injury or death Consult your health care professional or the accessory
manufacturer for proper use instructions
If using optional bed side rails and bed extension kit check to ensure they are properly and
securely in place BEFORE using the bed
Ensure the mattress is centered on the frame This will minimize the risk of the occupant
becoming trapped between the mattress and the bed rail
Individuals that cannot prevent themselves from rolling climbing out of the bed may require
alternative safe means of restraint
Replacement mattresses and bed rails with dimensions different than the original equipment
supplied or approved by Medline may not be interchangeable Variations in bed side rail design
and thickness size or density of the mattress could cause entrapment Use ONLY authorized
Medline replacement parts
For semi electric and full electric beds always remove the manual crank before performing
electronic functions If left in place the crank will turn when the motor is on and could cause
personal injury or damage to the bed
When disassembling the bed make sure all parts are in the lowest position
Electrical Cautions
Never operate the bed if it has a damaged cord or plug If it is not working properly call a
qualified electrician
Never plug into an outlet that is greater than 120 Volts AC Keep all cords away from heated or
hot surfaces
Ensure all cables and cords are routed in a way such that they will not become entangled
or pinched
1 800 MEDLINE 633 5463 medline com 9
Warnings Safety Instructions
Electrical Cautions
DO NOT open assemblies such as the motors hand control unit junction boxes or electrical
control boxes There are no user serviceable parts inside Only trained service personnel are
qualified to repair these parts If uncertified individuals perform any work on these beds the
warranty is voided
DO NOT use parts accessories or adapters other than those authorized by Medline
Unplug the power cord BEFORE performing any maintenance on the bed
After installing any connectors into the junction box be sure the cable plug is secure otherwise
injury or damage may occur
DO NOT force connectors into the junction box otherwise injury or damage may occur
DO NOT unplug the power cord from the junction box
Weight Limitations
The TOTAL weight limit of the Medline Home Care Bed including accessories mattress
occupant and any other object positioned on the bed is 450 lbs 204 12 kg for full or semi
electric beds
Never permit more than one person on in the bed at any time
Replacement mattresses and bed rails with dimensions different than the original equipment
supplied or approved by Medline may not be interchangeable Variations in bed side rail design
and thickness size or density of the mattress could cause entrapment Use ONLY authorized
Medline replacement parts
Body weight should be evenly distributed over the surface of the bed DO NOT lay sit or lean in
such a way that your entire body weight is placed only on RAISED head or foot sections of the
bed This includes when repositioning or transferring in or out of bed
10 MDR107002L MDR107003L MDR107003LO PIC 00299 Revision 05 14 19
Unpacking the Bed
The Medline Home Care Bed will arrive in two 2 boxes with the following contents
1 Head Board
1 Head Spring section
4 Casters 2 locking 2 non locking
1 Emergency Crank
1 Foot Spring section Full and Semi Electric Models include motors a junction box and
Electrical cord already attached
1 Hand Pendant Control and Cord
1 Foot Board
1 Drive Shaft length adjusts to adapt to Full Electric and Semi Electrics models
1 Emergency Battery Backup Box 9V batteries not included
FootBoard HeadBoard
Drive Shaft
Foot Spring section Head Spring section
Figure 1 Example of Major Components
1 800 MEDLINE 633 5463 medline com 11
Bed Assembly
Before assembly examine each item carefully for shipping damage If a part is found to be damaged
DO NOT use Contact your Dealer or Medline for instructions
During assembly DO NOT rotate the pull tube or the shaft of the motors all motors are adjusted to
proper position prior to shipping Rotation will lead to misadjustment of motors which may cause
frame damage
DO NOT attempt to operate the bed controls until assembly of the entire bed is complete as
damage to bed components or personal injury may occur
Bed Assembly Instructions in 7 Easy Steps
1 Connect head 5 Connect pull tube
section to foot to head section
section of bed
2 Straighten bed 6 Mount bed rails
assembly to sides of bed
3 Connect bed 7 Place mattress
assembly to on bed
headboard and
4 Connect center
drive shaft
See following sections for full assembly instructions
12 MDR107002L MDR107003L MDR107003LO PIC 00299 Revision 05 14 19
Bed Assembly
Head Spring section Foot Spring section
Figure 2 Connecting the head and foot frames
Connecting the Two Frames See Figure 2
1 Place the Head Spring Section on its side to your left with the center mounting hooks to
your right
2 Place the Foot Spring Section on its side to your right with the head frame pull tube at the
top of the assembly and the center mounting rivets facing to the left
3 The crank handles and or motors should be at your right
4 The head and foot springs should now be on their sides at approximately a 90 angle to
one another
5 Hook the bottom head spring center mounting latches to the bottom foot spring center
mounting rivets see Figure 2a
6 Hook the top head spring center mounting latches to the top foot spring center mounting
rivets It may be necessary to lift slightly on the head spring or foot spring to secure the
mounting latches and rivets
7 After head and foot springs are connected slowly open the springs into a horizontal
straight position while still on their sides Make sure the hooks engage the rivets at
8 Lay the bed flat with the springs facing up
1 800 MEDLINE 633 5463 medline com 13
Bed Assembly
Head Spring section Foot Spring section
Figure 3 Connecting the spring fabric
Connecting the Spring Fabric See Figure 3
1 With the bed flat and the springs facing up lift the head spring section upward to give slack
to the fabric Connect the spring fabric together with the links provided
2 Hook together all the links to the spring fabric
3 Lower the head spring section back down
14 MDR107002L MDR107003L MDR107003LO PIC 00299 Revision 05 14 19
Bed Assembly
To Install Casters
Ensure that the locking casters are installed diagonally from each other and are locked This will
provide maximum locking stability
Caster Lock
Push DOWN to Lock
Push UP to Unlock Insert caster shaft
into bed leg socket
Figure 4 Casters
1 Lay the bed ends flat on the floor
2 Position the two locking casters so they will be diagonally opposite from one another when
the bed is assembled See Figure 4B
3 Insert the shaft of the caster into the caster socket of each bed leg Ensure the stem is fully
inserted into the socket See Figure 4
4 To prevent excess movement of the bed during assembly lock each of the two locking
casters by pushing down on the caster lock
Note Locking the casters may not prevent the bed from moving on slick or slippery surfaces
5 To unlock the two locking casters pull up on the caster lock
Figure 4B Locking Caster positioning
1 800 MEDLINE 633 5463 medline com 15


Related Books

Régression linéaire multiple sous Excel

Régression linéaire multiple sous Excel

Réalisation des différentes étapes de la régression linéaire multiple sous Excel. Il y a deux écueils à éviter lors des travaux dirigés (TD) sur machine. Le premier est de ne pas assez guider les étudiants. On entend très vite fuser du fond de la salle la question fatidique « Qu’est-ce ...

Continue Reading...
COMPAGNO ANIMALE / FAMIGLIO Nome Sesso Età Razza ...

COMPAGNO ANIMALE / FAMIGLIO Nome Sesso Età Razza ...

COMPAGNO ANIMALE / FAMIGLIO Nome Sesso Età Razza Allineamento Peso Taglia Velocità Faccia / Portata CARATTERISTICHE PUNTI FERITA CLASSE ARMATURA

Continue Reading...
PF DES CA 10+ - Altervista

PF DES CA 10+ - Altervista

SCHEDA DEL PERSONAGGIO ® ©2003 Wizards of the Coast, Inc. È permesso fotocopiare questa scheda per uso personale Denota un'abilità che può essere utilizzata senza addestramento. Segnare questo riquadro con una X se l'abilità è un'abilità di classe per il personaggio. * La penalità di armatura alla prova, se presente, si applica ...

Continue Reading...
SCHEDA DEL PERSONAGGIO - Giochi Uniti

SCHEDA DEL PERSONAGGIO - Giochi Uniti

scheda del personaggio nome del personaggio stirpe classe allineamento linguaggi taglia divinitÀ etÀ genere background tempra percezione forza destrezza costituzione intelligenza saggezza carisma riflessi volontÀ ca cac cos des sag comp comp comp max des max des a a e e m m ogg ogg ogg acrobazia des ae m l comp ogg arm arcano int a e m lcomp ogg artigianato int a e m l compogg atletica for ...

Continue Reading...
Supplier Questionnaire - Warren Services

Supplier Questionnaire - Warren Services

Supplier Questionnaire 1. Company Details Name Address Telephone Fax E-mail Registered Office Product or services offered 2. Quality Assurance 2.1 Does your company operate an accredited quality system? YES / NO If YES, please enclose copies of your registration certificates and any other relevant details and move to section 3.

Continue Reading...
Supplier Production Part Approval Process (PPAP) Manual

Supplier Production Part Approval Process (PPAP) Manual

5.0 Added ref. to Supplier PPAP Form Pack ICAR 1128 (Ford Q1 Assessment) All New Document. Supplier PPAP Forms Pack ICAR 1128 (Ford Q1 Assessment) 06-15-2015 11.2 Added Special Characteristic Approval Form (SCAF) ICAR 1076 (Internal VDA Audit) 24.0 , Material Testing Form, Performance testing Form ICAR 1075 (Internal VDA Audit) 21.0

Continue Reading...
9. APPROVAL PROCESSES FOR CONTRACTORS, SUPPLIERS AND ...

9. APPROVAL PROCESSES FOR CONTRACTORS, SUPPLIERS AND ...

9. APPROVAL PROCESSES FOR CONTRACTORS, SUPPLIERS AND CONSULTANTS University of Bristol Issue date Building Services March 2005 Page 2 of 24 The approval process for such companies depends upon the circumstances pertaining to the engagement and this should be discussed with the Assistant Director (Building Services) prior to

Continue Reading...
SOLE SUPPLIER JUSTIFICATION FORM 1. Requester’s Information

SOLE SUPPLIER JUSTIFICATION FORM 1. Requester’s Information

2. Supplier’s details Name Address: 3. Sole Supplier Definition: A sole supplier purchase means that only one supplier, to the best of the requestor’s knowledge and belief, based upon thorough research, (i.e. conducting a market survey), is capable of delivering the required product or service. A Sole supplier method of acquisition is not ...

Continue Reading...
Supplier Qualification and Management Procedure

Supplier Qualification and Management Procedure

Every potential supplier, whether approval is required or exempt from approval, shall be requested to provide sufficient evidence of their ability to comply with established requirements particular for a project. All new suppliers classified in Tiers 1 through 4 are required to complete a Supplier Questionnaire form, at minimum.

Continue Reading...
Supplier Approval Process 8.3.10

Supplier Approval Process 8.3.10

Supplier Approval Upon successful completion of the audit, with no DIA issues, Social Responsibility approves the supplier for NPG use. The CFT reviews the Active New Supplier Setup Form and confirms to approve the supplier. The New Supplier Setup Form is sent to CMIO for set up in RMS.

Continue Reading...