Below-the-Hook Lifting Devices - ASME-PDF Free Download

http://files.asme.org/Catalog/Codes/PrintBook/31013.pdf

>>Below-the-Hook Lifting Devices - ASME-PDF Free Download Pdf [Fast DOWNLOAD]<<


Related Books

FERMILAB Solenoid Lifting Lug Analysis

FERMILAB Solenoid Lifting Lug Analysis

The sketch of the lifting lug is shown below: Shear Stress at the Weld The yield strength of carbon steel at 294K is conservatively 24,000 psi. An allowable stress of 24,000 psi is with a safety factor of 1.0. The Design of Below-the-Hook Lifting Devices section in ASME BTH-1-2008 provides the required safety factors. Section 2-2 defines two design categories: Category A, where loads are ...

Continue Reading...
B THE-HOOK EQUIPMENT SPREADER BEAMS

B THE-HOOK EQUIPMENT SPREADER BEAMS

ng lifting and spreader beams for use in primary steel mills, steel service centers, pulp and paper mills, power plants and in difficult environments with varied crane layouts. All Avon Engineering spreader beams are designed and manufactured in accordance with the latest revision of ASME Spec. B30.20 and BTH-1: Design of Below-the-Hook Lifting Devices. Five basic spreader beam models are ...

Continue Reading...
BELOW-THE-HOOK LIFTING DEVICE INFORMATION SHEET

BELOW-THE-HOOK LIFTING DEVICE INFORMATION SHEET

• Magnet Beams • Vacuum Beams • Below the Hook Lifters • ... The Operational Guide for Lifting Devices are guidelines intended to provide you with general procedures for installation, inspection, maintenance and repairs, and operation and operator training for below-the-hook lifting devices. Lifting devices, sometimes called below-the-hook lifters, attach hoists to their loads. FREE ...

Continue Reading...
Below-the-Hook Lifting Devices - files.asme.org

Below-the-Hook Lifting Devices - files.asme.org

Digital Download (PDF) / Order No. J1001T Print-Book / Order No. J10013 ASME BTH-1 – 2014 Design of Below-the-Hook Lifting Devices ISBN: 9780791869444 No. pages: 76 Digital Download (PDF) / Order No. J1751TM1 Print-Book / Order No. J17514 ASME Codes and Standards ASME is the leading international developer of codes and

Continue Reading...
Free eBooks ASME CSD-1-2015 Standard: Controls And Safety ...

Free eBooks ASME CSD-1-2015 Standard: Controls And Safety ...

ASME CSD-1-2015 Standard: Controls and Safety Devices for Automatically Fired Boilers ASME B20.1-2015 Standard: Safety Standard for Conveyors and Related Equipment Bioprocessing Piping and Equipment Design: A Companion Guide for the ASME BPE Standard (Wiley-ASME Press Series) ASME BTH-1-2017 Standard: Design of Below-the-Hook Lifting Devices The Essential Wood Fired Pizza Cookbook: Recipes and ...

Continue Reading...
BELOW-THE-HOOK LIFTING DEVICES

BELOW-THE-HOOK LIFTING DEVICES

Due to changes in design, advancement in techniques, and general interest of labor and industry in safety, the Sectional Committee, under the joint sponsorship of ASME and the Naval Facilities Engineering Command, U.S. Department of the Navy, was reorganized as an American National

Continue Reading...
Design of Below-the-Hook Lifting Devices

Design of Below-the-Hook Lifting Devices

(Revision of ASME BTH-1–2008) Design of Below-the-Hook Lifting Devices. ASME BTH-1–2011 (Revision of ASME BTH-1–2008) Design of Below-the-Hook Lifting Devices AN AMERICAN NATIONAL STANDARD Three Park Avenue • New York, NY • 10016 USA . Date of Issuance: January 25, 2012 The next edition of this Standard is scheduled for publication in 2014. This Standard will become effective 1 year ...

Continue Reading...
Standards Load carrying devices Lifting gear

Standards Load carrying devices Lifting gear

DIN 15402 part 1-Ramshorn shank hooks forgings DIN 15402 part 2-Ramshorn shank hooks machined lifting hooks DIN 15402-b-Ramshorn hooks with bearing and strengthening DIN 15411-Hook assemblies for Bottom hook blocks STB-Hook assemblie with cylindrical roller bearing DIN 15412 part 1-Crossheads for cranes DIN 15412 part2-Crossheads for cranes finished parts DIN 15413-Hook nuts DIN 15414-Nut ...

Continue Reading...
HOIST PRE-OPERATIONAL INSPECTION CHECK LIST

HOIST PRE-OPERATIONAL INSPECTION CHECK LIST

CONTROL DEVICES Confirm that hoist motion matches control markings. HOOK Check for damage, cracks, nicks, gouges and deformations of the throat opening. Check for wear on saddle or load bearing point, and any twisting. Refer to manufacturer’s operator manual. HOOK LATCH If a hook latch is required, check for proper operation. LIMIT SWITCHES Check that the upper limit device stops the lifting ...

Continue Reading...
Requirement For Use Of Hook Latches - ANSI/ASME API and OSHA

Requirement For Use Of Hook Latches - ANSI/ASME API and OSHA

Cranes states that, “Hooks shall be equipped with latches unless the application makes the use of a latch impractical. When provided, the latch shall bridge the throat opening of the hook for the purpose of retaining slings, or other lifting devices, under slack conditions (refer to ASME B30.10).” 9. OSHA 1910.181 Derricks gives requirements for safety latches in 1910.181(j)(2)(ii), which ...

Continue Reading...
Naval Facilities Engineering Command

Naval Facilities Engineering Command

NAVSEA 0989-030-7000, Lifting Standard (if applicable) 29 CFR 1915, Occupational Safety and Health Standards for Shipyard Employment 29 CFR 1917, Marine Terminals 29 CFR 1918, Safety and Health Regulations for Longshoring 29 CFR 1919, Gear Certification Preparation for Third Party Certifications of Cranes, Derricks, Container Spreaders, and Below-the-Hook Lifting Devices Used in Cargo Transfer ...

Continue Reading...