Data Sheet 5100 Duplex Pressure Gauge / Differential ...-PDF Free Download

Data-Sheet-5100-Duplex-Pressure-Gauge-/-Differential-....pdf

>>Data Sheet 5100 Duplex Pressure Gauge / Differential ...-PDF Free Download Pdf [Fast DOWNLOAD]<<


Related Books

data sheet 5100 duplex pressure gauge / differential ...

data sheet 5100 duplex pressure gauge / differential ...

5100 DR DiR Duplex-Pressure Gauges with Bourdon Tube Differential Pressure Gauges with Bourdon Tube 0008/08 Selection The pressure gauges are to be selected that the highest appearing pressure in the system will not raise higher than the full scale value. The instruments are loadable up to full scale, but not overrange protected. To ensure accurate reading of the differential pressure ...

Continue Reading...
Duplex-tank top return line filter Pi 5100

Duplex-tank top return line filter Pi 5100

When filter with non bypass configuration is selected, the collapse pressure of the element must not be exceeded. 8. Technical specifications see data sheet Pi 5000 Duplex-tank top return-line filter Pi 5100 NG 40 up to 1000 3 7.2 Filter elements see data sheet Pi 5000 7.1 Housing design Nominal size NG [l/min] number Order Type cavity with with

Continue Reading...
Duplex-tank top return line filter Pi 5100

Duplex-tank top return line filter Pi 5100

Duplex-tank top return-line filter Pi 5100 NG 40 up to 1000 2 2. Flow rate/pressure drop curve complete filter see data sheet Pi 5000 3. Separation grade characteristics y = beta-value x = particle size [µm] _ determined by multipass tests (ISO 16889) calibration according to ISO 1171 (NIST). 4. Filter performance data tested according to ISO 16889 (multipass test) Sm-x/PS elements with max ...

Continue Reading...
Duplex-tank top return line filter Pi 5100 - Filtramax

Duplex-tank top return line filter Pi 5100 - Filtramax

Duplex-tank top return-line filter Pi 5100 NG 40 up to 1000 2 2. Flow rate/pressure drop curve complete filter see data sheet Pi 5000 3. Separation grade characteristics y = beta-value x = particle size [µm] _ determined by multipass tests (ISO 16889) calibration according to ISO 1171 (NIST). 4. Filter performance data tested according to ISO 16889 (multipass test) Sm-x elements with max ...

Continue Reading...
Duplex-tank top return line filter Pi 5100

Duplex-tank top return line filter Pi 5100

Duplex-tank top return-line filter Pi 5100 NG 40 up to 1000 2 2. Flow rate/pressure drop curve complete filter see data sheet Pi 5000 3. Separation grade characteristics y = beta-value x = particle size [µm] _ determined by multipass tests (ISO 16889) calibration according to ISO 1171 (NIST). 4. Filter performance data tested according to ISO 16889 (multipass test) PS elements with max. ∆ p ...

Continue Reading...
Texsteam Pumps - Dresser NGS

Texsteam Pumps - Dresser NGS

4 The Series 2200 electric driven injection pump offers moderate flow and pressure rates. 1/4 horsepower motor available in TENV or EXP, single or 3 phase 316 stainless steel fluid end Simplex or duplex available Maximum discharge pressure 1,000 psi Maximum volume 120 gallons per day (duplex model) Built-in gear reducer available in 15, 30, or 60 strokes/minute

Continue Reading...
Tubing Data Sheet (MS-01-107;rev S;en-US;Catalog) - Swagelok

Tubing Data Sheet (MS-01-107;rev S;en-US;Catalog) - Swagelok

Suggested Allowable Working Pressure for Stainless Steel Tubing For higher pressures, see the Swagelok Medium- and High-Pressure Fittings, Tubing, Valves, and Accessories catalog, MS -02 472. Rating based on repeated pressure testing of the Swagelok tube fitting with a 4:1 design factor based upon hydraulic fluid leakage. Tube OD in.

Continue Reading...
Pressure Ratings of Steel Pipe Based on ASTM A53 Grade B ...

Pressure Ratings of Steel Pipe Based on ASTM A53 Grade B ...

Pressure Ratings of Steel Pipe Based on ASTM A53 Grade B or A106 Grade B Seamless ANSI 831.1, 1977 with allowances for connections and fittings reduces these working pressures approx. 25% PIPE PRESSURE-PSIWATER PRESSURE-PSIPIPE NOM. SIZE SCH. HAMMER NOM. SIZE SCH. HAMMER INCHES WORKINGFACTORNO.BURST INCHES WORKINGFACTORBURSTNO. 1/8 3500420020,20016015,700405.43 2~ 1/8 4800XXS28,000690023 ...

Continue Reading...
Tubing Data Sheet (MS-01-107;rev 10;en-US) - Swagelok

Tubing Data Sheet (MS-01-107;rev 10;en-US) - Swagelok

Working Pressure, psig Note: For gas service, select a tube wall thickness outside of the shaded area. (See Gas Service, page 2.) 1/8 8000 10 200 200 3/16 5100 6 600 9600 300 1/4 3700 4 800 7000 9600 400 5/16 3 700 5500 7500 500 3/8 3 100 4500 6200 600 1/2 2 300 3200 4500 5900 810 5/8 1 800 2600 3500 4600 5300 1010 3/4 2100 2900 3700 4300 5100 1210

Continue Reading...
Agilent 5110 ICP-OES - HPST

Agilent 5110 ICP-OES - HPST

Duplex read-out circuitry is provided on both sides of the ... the Agilent 5110 ICP-OES Site Preparation Guide. Dimensions Width Depth Height Weight 800 mm 740 mm 940 mm 106 kg 31.5 in 29 in 37 in 233 lb Exhaust requirements The 5110 ICP-OES incorporates corrosion-resistant materials, and an on-board fan maintains internal positive pressure to keep acid vapors out. Exhaust flow minimum ...

Continue Reading...
PIPE INDEX - Pinnacle Industrial Supply

PIPE INDEX - Pinnacle Industrial Supply

pipe index stainless steel welded / seamless pipe dimension and weight 2 stainless steel welded pipe type 304l sch. 5s, 10s allowable working pressure 3 stainless steel welded pipe type 304 sch. 10s allowable working pressure 4 stainless steel welded pipe type 304l sch. 40s, 80s allowable working pressure 5

Continue Reading...